Classy Drives Contact Form

FaceBookTwitterLinkedInGoogle+

Frequently Asked Questions - FAQ's

 

Can I drive on the product?
Yes, the product can be designed for every application and can even take heavy traffic such as buses and lorries.


Is the resin toxic?
No. Once installed Classy Driveways product it is an inert material. Part of the resin blend is derived from natural plant extract.


How is it permeable?
Classy Driveways use just enough binder to ensure each particle is coated allowing the aggregate / EPDM to bond securely whilst leaving voids for water to permeate through.


What depth is it normally laid at?
The depth we lay will vary for each project, this depends on the type of application and the size of the aggregate / EPDM used. Typically the depth of our resin is approximately15 - 18mm. On the other hand the rubber bond is laid approximately 20 - 40mm.


Can I lay it myself?
Yes. Please contact for further details. (We include tools and materials) For projects larger than 20m² it is recommended you use a Classy Driveways fully trained installation team.


How long will it last? 
With a product guarantee of 10 years, our resin specialist and technology team are confident enough to ensure you have the perfect surface for many of years.


How long does it take to cure?
Our resin products will be suitable for use after 6-8 hours for pedestrian traffic applications, and 24 hours for vehicular traffic. For heavy use, 48 hours would be ideal where possible to ensure a fully cured surface.


Is it easy to clean?
Yes. Our product is very low maintenance and easy to look after. It can be cleaned with a power washer or simply a stiff broom.


Can I use the resin with aggregate or EPDM I already have?
In principle yes; although any aggregate or EPDM would need to satisfy our minimum quality standard. If this is something you would like to discuss further, please contact us for more information.